SKU: 647590-B21
HP FlexFabric 10Gb 2-port 554M Adapter
HP FlexFabric 10Gb 2-port 554M Adapter
Sale
Sold out
Regular price
$0.00 USD
Regular price
Sale price
$0.00 USD
Unit price
per
In stock
-
Authorized HPE Distributor - Source with confidence from a trusted HPE partner.
-
Orders are dispatched within 1 business day!
-
Stocked inventory - Deep inventory on hand for faster fulfillment.
RENEW Part №: 647590R-B21
The HPE FlexFabric 10Gb 2-port 554M adapter supports Virtual Connect Flex-10 that allows each 10Gb port to be divided into four physical NICs to optimize bandwidth management for virtualized servers. When connected to a Data Center Bridging (DCB) capable switch, Fibre Channel over Ethernet (FCoE) and Ethernet I/O are separated and routed to the corresponding network. For iSCSI storage, the HPE 554M supports full protocol offload to provide better CPU efficiency when compared to software initiators, thus enabling the server to handle increased virtualization workloads and compute-intensive applications. This combination of high-performance network and storage connectivity reduces cost and complexity and provides the flexibility and scalability to fully optimize Gen8 BladeSystem servers. The HPE 554M delivers the performance benefits and cost savings of converged network connectivity for HPE BladeSystem servers. The dual-port HPE 554M optimizes network and storage traffic with hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE), Fibre Channel over Ethernet (FCoE) and iSCSI.
QuickSpecs
| HPE Quickspecs | Open Link |
Generic
| Network processor | Emulex BE3 |
| Data rate | Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical bandwidth. |
| Onboard memory | 128MB |
| Bus type | PCI Express v2.0 (Gen 2) x8 |
| Form factor | Type A Mezzanine Card |
| IEEE Compliance | 802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4) and 802.3x |
| Operating Temperature | 0% |
| Operating Humidity | 10% to 90% non-condensing |
| Power requirement | 8.6W idle and 10W maximum |
| Emissions classification | FCC Class A |
| Agency approvals | USA: FCC (CFR 47 part 15) and UL 60950
Canada: ICES-003 and CSA60950 Japan: VCCI European Union: EN55022:1998 (CISPR 22), EN55024:1998, and IEC60950:1999 (EN60950:2000) Australia: ACA, AS/NZS3548/EN55022:1998, EN55024:1998 Korea: MIC (RRL), EMC Registration |
| RoHS Compliance | 6 of 6 |
| Safety | UL Mark (USA and Canada) CE Mark EN 60590 |
Description
Description
The HPE FlexFabric 10Gb 2-port 554M adapter supports Virtual Connect Flex-10 that allows each 10Gb port to be divided into four physical NICs to optimize bandwidth management for virtualized servers. When connected to a Data Center Bridging (DCB) capable switch, Fibre Channel over Ethernet (FCoE) and Ethernet I/O are separated and routed to the corresponding network. For iSCSI storage, the HPE 554M supports full protocol offload to provide better CPU efficiency when compared to software initiators, thus enabling the server to handle increased virtualization workloads and compute-intensive applications. This combination of high-performance network and storage connectivity reduces cost and complexity and provides the flexibility and scalability to fully optimize Gen8 BladeSystem servers. The HPE 554M delivers the performance benefits and cost savings of converged network connectivity for HPE BladeSystem servers. The dual-port HPE 554M optimizes network and storage traffic with hardware acceleration and offloads for stateless TCP/IP, TCP Offload Engine (TOE), Fibre Channel over Ethernet (FCoE) and iSCSI.
Specification
Specification