The HPE FlexFabric 20Gb 2-port 650M adapter for ProLiant Gen9 server blades provides full-featured, high performance, converged 20Gb Ethernet that accelerates IT services and increases data center efficiency across a broad range of I/O intensive enterprise, cloud, and Telco workloads. When connected to Hewlett Packard Enterprise Virtual Connect FlexFabric 20/40 F8 Modules, the HPE FlexFabric 650M adapter provides 20GbE performance. It offers a rich set of offload technologies including overlay network tunneling and storage, increasing virtualization performance and host efficiency. The HPE 650M is a dual-speed adapter that can also operate at 10GbE when connected to Hewlett Packard Enterprise Virtual Connect Flex-10/10D Module or HPE 6125XLG Ethernet Switch. Combining both the FlexibleLOM and Mezzanine adapters in a single BladeSystem ProLiant server can provide up to 80Gb/s of converged bi-directional Ethernet bandwidth, helping to alleviate network bottlenecks.
QuickSpecs
Generic
| Network processor | Emulex XE-104 |
| Data Rate | Two ports, each at 40Gb/s bi-directional; 80Gb/s aggregate bi-directional theoretical bandwidth |
| Bus type | PCI Express 3.0 (Gen 3) x8 |
| Form Factor | Type A mezzanine adapter (works in Type A and Type B mezzanine slots) |
| IEEE Compliance | 802.3ae, 802.1Q, 802.3x, 802.1p, 802.3ad/LACP, 802.1AB (LLDP), 802.1Qbg, 802.1Qbb, 802.1Qaz, 802.3ap |
| Power | 7.5W typical, 8.6W maximum |
| Temperature - Operating | 0°to 55 |
| Humidity - Operating | 15% to 80% non-condensing |
| Agency Approvals | USA: |
| RoHS Compliance | 6 of 6 |
| |
