The QMH2672 16Gb FC HBA is a dual channel Fibre Channel mezzanine card that provides reliable, high-performance connectivity at 8Gb/s or 16Gb/s. This is a Type A mezzanine card for HPE BladeSystem c-Class that is compatible with HPE ProLiant Server blades starting with Gen8. All HPE 8 Gb and 16 Gb Fibre Channel Interconnects for BladeSystem c-Class are supported by the QMH2672. It is optimized for HPE and is also supported by third-party SAN vendors. For details on supported HPE Fibre Channel SAN Switches, please consult the SAN Design Reference Guide at the following WEB address https://www.hpe.com/us/en/networking/switches.html. The HPE BladeSystem c7000 Platinum Enclosure is required to permit 16Gb/s speed. Other HPE BladeSystem c7000 Enclosures and HPE BladeSystem c3000 Enclosures will have a maximum speed of 8Gb/s.

QuickSpecs

HPE Quickspecs

Open Link

Generic

Dimensions (L x W)	3.5 in x 3.9 in
Media	N/A (Always connects to BladeSystem interconnect module)
Ports	Two
Power	13 W
Max Temperature - Operating	10° to 70°C (55° to 158°F) at sea level with an altitude derating of 1.0°C per every 305 m (1.8°F per every 1000 ft) above sea level to a maximum of 3050m (10,000 ft), no direct sustained sunlight. Maximum rate of change is 10°C/hr (18°F/hr). The upper limit may be limited by the type and number of options installed. System performance may be reduced if operating with a fan fault or above 30°C (86°F).
Temperature - Non-Operating
Humidity - Operating	-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).
Humidity - Non-operating	5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.
Altitude - Operating	3050 m (10,000 ft). This value may be limited by the type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500 ft/min).
Altitude - Non-operating	9144 m (30,000 ft). Maximum allowable altitude change rate is 457 m/min (1500 ft/min).