The HP Flex-10 10Gb 2-port 552M is a Flex-10 10 Gigabit Ethernet (10GbE) mezzanine card for BL-c Gen8 servers that utilizes the Emulex BE3 controller. The HP 552M adapter supports Virtual Connect Flex-10, which allows each 10Gb port to be divided into four physical NICs to optimize bandwidth management for virtualized servers. The HP 552M optimizes network and storage traffic with hardware acceleration and offloads for stateless TCP/IP and TCP Offload Engine (TOE).

QuickSpecs

HPE Quickspecs

Open Link

Generic

Network processor	Emulex BE3
Data rate	Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex theoretical bandwidth.
Onboard memory	128MB
Bus type	PCI Express v2.0 (Gen 2) x8
Form factor	Type A Mezzanine Card
IEEE Compliance	802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4), and, 802.3x
Operating Temperature	0
Operating Humidity	10% to 90% non-condensing
Power requirement	8.6W idle and 10W maximum
Emissions classification	FCC Class A
Agency approvals	USA: FCC (CFR 47 part 15) and UL 60950 Canada: ICES-003 and CSA60950 Japan: VCCI European Union: EN55022:1998 (CISPR 22), EN55024:1998, and IEC60950:1999 (EN60950:2000) Australia: ACA, AS/NZS3548/EN55022:1998, EN55024:1998 Korea: MIC (RRL), EMC Registration
RoHS Compliance	6 of 6
Safety	UL Mark (USA and Canada) CE Mark EN 60590