I/O ports and slots | 48 fixed 1000/10000 SFP+ ports
4 QSFP+ 40-GbE ports |
Additional ports and slots | 1 RJ-45 serial console port
1 RJ-45 out-of-band management port
1 USB 2.0 |
Power supplies | 2 power supply slots
1 minimum power supply required (ordered separately) |
Fan Tray | 2 fan tray slots
The customer must order fan trays, as fan trays are not included with the switch. This system requires
two same-direction airflow fan trays to function properly. The system
should not be operated with only one fan tray for more than 24 hours. The system should not be
operated without a fan tray for more than two minutes. The system should not be operated outside of
the temperature range of 32°F (0°C) to 113°F (45°C). Failure to comply with these operating
requirements may void the product warranty |
Physical
characteristics |
Dimensions |
17.32(w) x 25.98(d) x 1.72(h) in (43.99 x 65.99 x 4.37 cm) |
Weight |
28.66 lb (13 kg) shipping weight |
|
Memory and processor | 512 MB flash; Packet buffer size: 9 MB, 2 GB SDRAM |
Performance |
10 Gbps Latency |
< 1.5 µs (64-byte packets) |
Throughput |
up to 952 Mpps |
Routing/Switching capacity |
1280 Gbps |
Routing table size |
16000 entries (IPv4), 8000 entries (IPv6) |
MAC address table size |
128000 entries |
|
Environment |
Operating temperature |
32°F to 104°F (0°C to 40°C) |
Operating relative humidity |
15% to 95% @ 104°F (40°C) |
Nonoperating/Storage temperature |
-40°F to 158°F (-40°C to 70°C) |
Nonoperating/Storage relative humidity |
15% to 95% @ 140°F (60°C) |
Altitude |
up to 10,000 ft (3 km) |
Acoustic |
Power: 54.1 dB, Pressure: 40.2 dB |
|
Electrical characteristics |
Frequency |
50/60Hz |
Maximum heat dissipation |
887 BTU/hr (935.79 kJ/hr) |
Voltage |
100 - 240 VAC, rated
-40 to -60 VDC, rated (depending on power supply chosen) |
Maximum power rating |
54.8 W |
Idle Power |
200 W |
|
Safety | UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part
2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR
Subchapter J; NOM; ROHS Compliance |
Emissions | VCCI Class A; EN 55022 Class A; ICES-003 Class A; ANSI C63.4 2003; AS/NZS CISPR 22 Class A; EN
61000-3-2:2006; EN 61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC; FCC (CFR
47, Part 15) Class A |
Immunity |
Generic |
ETSI EN 300 386 V1.3.3 |
EN |
EN 55024:1998+ A1:2001 + A2:2003 |
ESD |
EN 61000-4-2; IEC 61000-4-2 |
Radiated |
EN 61000-4-3; IEC 61000-4-3 |
EFT/Burst |
EN 61000-4-4; IEC 61000-4-4 |
Surge |
EN 61000-4-5; IEC 61000-4-5 |
Conducted |
EN 61000-4-6; IEC 61000-4-6 |
Power frequency magnetic field |
IEC 61000-4-8; EN 61000-4-8 |
Voltage dips and interruptions |
EN 61000-4-11; IEC 61000-4-11 |
Harmonics |
EN 61000-3-2, IEC 61000-3-2 |
Flicker |
EN 61000-3-3, IEC 61000-3-3 |
|
Management | IMC - Intelligent Management Center; command-line interface; out-of-band management; SNMP
Manager; Telnet; FTP |
Notes | The customer must order a power supply, as the device does not come with one. At least one JC680A
or JC681A is required.
The HPE FlexFabric 5900AF-48XG-4QSFP+ Switch is NEBS GR-1089-CORE compliant. |
Services | Refer to the Hewlett Packard Enterprise sales website at: http://www.hpe.com/networking/services
for details on the service-level descriptions and product numbers. For details about services and
response times in your area, please contact your local Hewlett Packard Enterprise sales office. |
| |