HPE X132 10G SFP+ LC ER Transceiver

Part № : J9153AR

RENEW Part № : J9153AR

Availability : Call

  • Description
  • Specification
HPE transceivers and cables are the critical fabrics that bond the data center infrastructure together. Tested for 100% compatibility with HPE adapter cards and switches, Hewlett Packard Enterprise provides ProLiant Server interoperability. These cost-effective transceiver and cable solutions are tuned to match various speed, form factors, distances, and signal transduction media.


HPE Quickspecs Open Link


Ports 1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-ER); Duplex: full only
Connector type LC
Wavelength 1550 nm
Physical characteristics
Dimensions 2.22(d) x 0.55(w) x 0.47(h) in. (5.65 x 1.39 x 1.19 cm)
Weight .04 lb., Fully loaded
Transceiver form factor SFP+
Operating temperature 32°F to 158°F (0°C to 70°C)
Operating relative humidity 5% to 95%, noncondensing
Non-operating/Storage temperature -40°F to 158°F (-40°C to 70°C)
Non-operating/Storage relative humidity -40°F to 185°F (-40°C to 85°C)
Altitude up to 10,000 ft. (3 km)
Electrical characteristics
Power consumption typical 1.3 W
Power consumption maximum 1.5 W
Cabling Cable type:
Single-mode fiber optic, complying with ITU-T G.652;
Maximum distance:
  • 40km
Fiber type Single Mode
Notes Check switch release notes for minimum version of software required to support this transceiver. Some switches have limits as to how many of this particular transceiver can be installed. See the release notes of the switch software/firmware being used for more details.
Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office

Related Products