HPE transceivers and cables are the critical fabrics that bond the data center infrastructure together. Tested for 100% compatibility with HPE adapter cards and switches, Hewlett Packard Enterprise provides ProLiant Server interoperability. These cost-effective transceiver and cable solutions are tuned to match various speed, form factors, distances, and signal transduction media.

QuickSpecs

HPE Quickspecs

Open Link

Generic

Ports	1 LC 1000BASE-LH port (no IEEE standard exists for 1550 nm optics); Duplex: full only
Physical characteristics	Dimensions 2.17(d) x 0.60(w) x 0.46(h) in. (5.5 x 1.53 x 1.18 cm) Weight 0.04 lb. (0.02 kg)
Environment	Operating temperature 32°F to 158°F (0°C to 70°C) Operating relative humidity 0% to 85%, noncondensing Non-operating/Storage temperature -40°F to 212°F (-40°C to 100°C) Non-operating/Storage relative humidity -40°F to 203°F (-40°C to 85°C) Altitude up to 10,000 ft. (3 km)
Cabling	Cable type: Low metal content, single-mode fiber-optic, complying with ITU-T G.652 and ISO/IEC 793-2 Type B1; Maximum distance: 10-70,000 m (single-mode fiber)
Notes	Power consumption is 0.8 watts typical with 1 watt maximum at 100% utilization. For distances less than 20 km, a 10 dB attenuator must be used. For distances between 20 km and 40 km, a 5 dB attenuator must be used. Attenuators can be purchased from most cable vendors.
Services	Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office