|Storage interface (SAS/SATA)
8 SAS lanes across 2 x4 external Mini-SAS HD ports
12Gb/s SAS, 6Gb/s SATA technology
Mix-and-match SAS and SATA drives to the same controller
Support for SAS tape drives
PCI Express 3.0 x8 link
RAID 0, 1, 5, 10
Mixed Mode (RAID logic drives and HBA physical drives simultaneously)
Legacy and UEFI boot operation
UEFI System Utilities (storage configuration)
Up to 238 physical drives
Up to 64 logical drives
Supports up to 8 daisy chained HPE D3610 Disk Enclosure and HPE D3710 Disk Enclosure in dual
HPE Smart Array SR Secure Encryption (optional license)
HPE SSD Smart Path
Rapid Parity Initialization (RPI)
Performance Optimization-Degraded Reads and Read Coalescing
Seamless upgrades from HPE Smart Array Software RAID
Seamless upgrades to HPE Smart Array P-class Controllers
|External: 8 SAS/SATA lanes across 2 x4 external Mini-SAS HD ports
|PCIe Plug-in Controller (occupies a PCIe expansion slot)
|12Gb/s SAS (1200 MB/s theoretical bandwidth per physical lane)
6Gb/s SATA (600 MB/s theoretical bandwidth per physical lane)
PCI Express 3.0 x8 link width
|The following features offer detection of possible failures before they occur, allowing preventive action to
Predictive drive failure detects possible drive failure before it occurs, allowing replacement of the component before failure occurs.
Background surface scan checks drives during inactive periods and automatically remaps bad sectors, ensuring data integrity.
HPE SmartSSD Wear Gauge reports the amount of lifetime remaining on your SSDs.
|Minimizes downtime, reconstructs data, and facilitates a quick recovery from drive failure
Recovery ROM: This feature protects the user from a firmware image corruption by storing a redundant
copy of the firmware image. If the active firmware image becomes corrupt, the controller will use the
redundant firmware image and continue operating.
On-Line Spares: There is no limit to the number of spare drives that can be installed prior to drive failure.
If a failure occurs, recovery begins with an On-Line Spare and data is reconstructed automatically.
DRAM ECC detects and corrects data bit errors.
|HPE SSD Smart Path
|The HPE SSD Smart Path feature included in the Smart Array software stack improves Solid State Disk (SSD) read performance by up to 4x. HPE SSD Smart Path chooses the optimum path to the SSD and accelerates reads for all RAID levels and RAID 0 writes.
|HPE Smart Array SR SmartCache
|The HPE Smart Array SR SmartCache feature is a controller-based read and write caching solution in a
DAS environment that caches the most frequently accessed data ("hot" data) onto lower latency SSDs to
dynamically accelerate application workloads. The SmartCache architecture is flexible and supports any
HPE ProLiant Gen10 HDD for bulk storage and SSD as an accelerator. SmartCache is deployed and
managed using the HPE Smart Storage Administrator (HPE SSA). SmartCache is enabled on this
controller and no license is required.
For additional information please visit: http://www.hpe.com/servers/smartcache.
|HPE Smart Array SR Secure Encryption (optional license)
|HPE Smart Array SR Secure Encryption is a Smart Array controller-based data encryption solution that
protects sensitive, mission critical data. This is an enterprise-class encryption solution for data-at-rest on
any drives attached to the HPE Smart Array controllers including data on the controller cache. Secure
Encryption requires an optional license per server (see Related Options for more information on the
The solution is available for both local and remote key management mode deployments. Local Key Management Mode is focused on single server deployment where there is one Master key per controller that is managed by the user. Remote Key Management Mode is for enterprise wide deployments from just a few servers to thousands of servers.
For more information on please visit: http://www.hpe.com/servers/secureencryption
|FIPS 140-2 Cryptographic Module Validation
|FIPS provides a security assurance level validation for cryptographic modules. This HPE Smart Array SR Gen10 Controller is a cryptographic module that is currently on the Validation Program FIPS 140-2 Implementation Under Test List. The National Institute of Standards and Technology (NIST) issue the FIPS 140-2 requirements and standards for cryptography modules that include both hardware and software components.
|The warranty for this device is 3 years parts only.
Warranty Upgrade Options
Response - Upgrade on-site response from next business day to same day 4 hours.
Coverage - Extend hours of coverage from 9 hours x 5 days to 24 hours x 7 days.
Duration - Select duration of coverage for a period of 1, 3, or 5 years.
Warranty upgrade options can come in the form of Care Packs, which are sold at the HPE System level to which this product attaches.